MSDS
MATERIAL SAFETY DATA SHEET
GREEN UP FORTE
Issued: 05/08/2013
Revision No: 4
1.IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND OF THE COMPANY / UNDERTAKING
Product name: GREEN UP Forte
Company name: GREEN LIFE GROUP Ltd
HAPIRION 78 ASHDOD
P.O.B 13159 YAVNE, 81225 ISRAEL
Tel: 972-8-8565648
Fax: 972-8-8565645
2. HAZARDS IDENTIFICATION
Main hazards:
R36/38: Irritating to eyes and skin
Accident of leakage, rinse with plenty of water
3. COMPOSITION / INFORMATION ON INGREDIENTS
Hazardous ingredients: Blend of surfactants from natural sources, sequestrants, silicates and a solvent carrier.
Combined with the following components
CAS: 6440-58-0, CAS: 497-19-8, CAS: 107-98-2
CAS: 11128-66-2, CAS: 9005-65-6, CAS 7732-18-5
4. FIRST AID MEASURES (SYMPTOMS)
Skin contact: There may be mild irritation at the site of contact.
Eye contact: There may be mild irritation and redness.
Ingestion: No significant hazard.
Inhalation: No significant hazard
4. FIRST AID MEASURES (ACTION)
Symptoms: No symptoms expected. Seek medical advice if symptoms persist
Skin contact: Wash off with water Seek medical advice if any discomfort persists
Eye contact: Bathe the eye with running water for 10 minutes.
Ingestion: Do not induce vomiting. If conscious, give half litre of water or milk to drink immediately. Seek medical advice if symptoms persist.
Inhalation: No significant hazard
5. FIRE-FIGHTING MEASURES
Non flammable.
No special extinguishing recommendations eyes.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions: Refer to section 8 of SDS for personal protection details.
Environmental precautions: Do not discharge into drains or rivers. Contain the spillage using bunding.
Clean-up procedures: Absorb into dry earth or sand. Wash the spillage site with large amounts of water.
7. HANDLING AND STORAGE
Handling requirements: Avoid contact with eyes, and prolonged skin contact.
Storage conditions: Store in cool, well ventilated area. Reach out of children. Avoid frost and high temperatures.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering measures: No significant hazard
Respiratory protection: No significant hazard
Hand protection: Exercise normal Industrial Hygiene
Eye protection: Ensure eye bath is to hand.
Skin protection: Avoid prolonged skin contact.
9. PHYSICAL AND CHEMICAL PROPERTIES
State: Liquid
Colour: Pale coloured liquid
Odour: Barely perceptible odour
Solubility in water: Soluble
Flash point °C: none
Relative density: 1.06
pH: 8-9 @10% dilution @ 25 C
10. STABILITY AND REACTIVITY
Stability: Stable under normal conditions.
11. TOXICOLOGICAL INFORMATION
Acute Toxicity (Lethal Doses)
LD50 Oral rat: > 2000 mg/kg Low oral toxicity.
LD50 Dermal rabbit: (calculated) > 4000 mg/kg.
Inhalation: Unlikely to cause harmful effects under normal conditions of handling and use.
Chronic Toxicological Effects / Long Term Exposure
No long-term risks to man are associated with the normal handling and use of this material.
12. ECOLOGICAL INFORMATION
Mobility: Soluble in water.
Persistence and degradability: Biodegradable.
Bioaccumulative potential: No bioaccumulation potential.
Other adverse effects: Negligible ecotoxicity.
13. DISPOSAL CONSIDERATIONS
Disposal of packaging: Dispose of as normal industrial waste.
NB: The user's attention is drawn to the possible existence of regional or national regulations regarding disposal.
14. TRANSPORT INFORMATION
ADR / RID
Shipping name: Not Classified
IMDG / IMO
IATA / ICAO
15. REGULATORY INFORMATION
Risk phrases:
R36/38: Irritating to eyes and skin.
Safety phrases:
S2: Keep out of the reach of children.
S26: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Note: The regulatory information given above only indicates the principal regulations specifically applicable to the product described in the safety data sheet. The user's attention is drawn to the possible existence of additional provisions which complete these regulations. Refer to all applicable national, international and local regulations or provisions.
16. OTHER INFORMATION
Other information: The phrases below refer to the raw materials used in the formulation, not the finished product.
Risk phrases used in s.2:
R35: Causes severe burns.
The following documents were referred to in preparing this data sheet.
The Chemicals (Hazard Information and Packaging for Supply) Regulations 2002. No. 1689. Workplace Exposure Limits 2005 (EH40) Control of Substances Hazardous to Health Regulations 2002 (as amended) The Carriage of Dangerous Goods and use of transportable pressure equipment regulations 2004.
Legal disclaimer: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. This company shall not be held liable for any damage resulting from handling or from contact with the above product.